IrwinRacing
New Member
Terminator Chassis "Racecars With Attitude"
Posts: 34
|
Post by IrwinRacing on May 28, 2005 11:54:06 GMT -5
Who is the guy who drives the 15C Street Stock ?
|
|
|
Post by jcswebmaster on Jun 4, 2005 1:09:46 GMT -5
His name is Aaron Chesser.
|
|
IrwinRacing
New Member
Terminator Chassis "Racecars With Attitude"
Posts: 34
|
Post by IrwinRacing on Jun 7, 2005 19:04:53 GMT -5
I was there Memorial Day weekend ! And he seems to be a very good driver & clean !
I m coming up to race Pure Stock some and for the big race in July, but the rules seem questionable like the carb could you help me out with them like : OEM type Carbs per make/ Gas carbs only; No fuel injection All Carbs must have choke housing and shaft (air horn)
We run a Rochester 2G, does it have to have a choke flap in it or a shaft or can it be open ?
With a powerglide trans what gear does most people run ( 3.42 ) ? Cause it seems like a 1/3 mile & a wide track.
|
|
|
Post by jcswebmaster on Jun 13, 2005 19:26:09 GMT -5
The best thing to do is give Bob Doles a call. He is the one that tech's the class and will be able to answer all the questions you have. I'm not sure about the gearing for a powerglide. I'm running a turbo 350 in second gear with 3.73's and 235/60/15 tires. Some of the guys that are running the same combo are running 255/60/15 tires as well. I know a couple of them are running 4 speed tranny's with 3.73 and 4.10 gears. Bob's phone number is 740-887-4942. I hope to see you at the July 3rd race!!! For updates, check out our website at www.jacksoncountyspeedway.net
|
|
IrwinRacing
New Member
Terminator Chassis "Racecars With Attitude"
Posts: 34
|
Post by IrwinRacing on Jun 27, 2005 17:10:47 GMT -5
We are coming up on Friday & Sunday Night for the big race !
Thanks !
|
|